You must have javascript enabled to use rc-car.org !

SuperX 1S 75mm HD Moblite7 Happymodel HD Bwhoop Brushless Motors

KV20000 Drone

USD $298.59

Condition : New

Free Shipping

{{variant_type_name}} :
eBay
SKU: N/A This site contains affiliate links for which we may be compensated Cameras & Photo / Camera Drones

Notify me when the price drops

We will email you if we find a lower price on this product!

Target price (USD) $

Notes: Recommend use the battery with lead wire, both A30 and BT2.0 plug battery are compatible.  Specifications: Brand Name: Happymodel Model: Moblite7 HDZERO V3 Frame wheelbase: 75mm Weight: 31.5 gram without battery Size: 98mm*98mm*50mm UART ELRS v3.0 ready Compatible with 1S Lipo battery or Lihv battery Battery Plug: GNB A30 Onboard blackbox ready Package includes: Item Name Qty Mobula7 v4 75mm frame +Canopy
1 SuperX HD ELRS AIO flight controller
1
Happymodel 1002 KV20000 Unibell brushless motor
4
Gemfan 1610-2 bi-blades propeller(4cw+4ccw)
1
HDZero Nano Lite Camera
1
HDZero Whoop Lite VTX
1
Spare Canopy
1
Propeller disassemble tool
1
Screw driver
1 Flight controller SuperX HD ELRS Betaflight 4.4.2 firmware ready Firmware target: CRAZYBEEF4DX MCU:STM32F411CEU6 (100MHz, 512K FLASH) Sensor: BMI270 or ICM42688P (SPI connection) Power supply: 1-2S Lipo Lihv battery input (DC 2.8V~8.7V), only support 1s input for this drone Built-in 12A(each) Blheli_S 4in1 ESC Dshot300 read Built-in UART elrs receiver , elrs v3.0 ready, support WIFI and pass-through firmware update Bluejay ESC Firmware ready Built-in 5V 1A BEC Built-in voltage detection No betaflight analog osd chip Onboard 4in1 ESC Power supply: 1-2S LiPo/LiPo HV Current: 12A continuous peak 15A (3 seconds) Support ESC-Configurator and BLHELI_S Suite configurator Factory firmware: Z-H-30 – Bluejay, 0.19, 48kHz Default protocol: DSHOT300 Onboard UART ExpressLRS 2.4GHz Receiver RF Frequency: 2.4GHz Antenna: enameled copper wire 31mm length Telemetry output Power: <12dBm Receiver protocol: CRSF Default firmware version: ExpressLRS V3.0.1 The same hardware with Happymodel EP1 receiver Could update firmware via ExpressLRS configurator or WIFI or Betaflight pass-through Motor Model: EX1002 20000KV Configu-ration:9N12P Stator Diameter:10mm Stator Length:2mm Shaft Diameter:Φ1.5mm Motor Dimension(Dia.*Len):Φ13.5mm*12.5mm Weight(g):2.5g No.of Cells(Lipo):1S only Propeller Gemfan 1610-2 Bi-blades Weight:0.24g Material: PC Pitch:1 inch Props Dia:40mm Center Hole Dia:1.5mm HDZero Nano Lite Camera 14x16x11 mm 1.5gram 0.5 inch, up to 10650 mV/Lux-sec ultra-high sensitive CMos sensor Excellent low light performance Fov: 4:3: D:130° H:108° v:84° 16:9:D:122° H:108° V:65° HDZero Whoop Lite VTX 1S Input 25mW/200mW RF Output-SmartAudio Support 25.5×25.5 M2 Soft Mounting- Antenna Retention Removable Shielding Box- 32.5×32.5mm(29x29mm inner) 4.5grams/4mm Thickness (without shielding) Default factory dump file: Moblite7 HDZERO 1S 75mm digital HD brushless whoop v3 dump file Port setting: Welcome to My Store

Returns Accepted for this item if it's within 30 Days

SuperX 1S 75mm HD Moblite7 Happymodel HD Bwhoop Brushless Motors KV20000 Drone
super
See more
Price type
IN STOCK OUT STOCK